These meters can be mounted directly to equipment to measure frequency in a variety of ranges from 48Hz to 440Hz. Custom ranges are also available. Standard operating voltage is 100 to 150V. Also available are 200-250V and 440V models. Enclosed in a durable Bakelite case, meters are designed for flush mounting and measure 3 1/2" in diameter. Hermetically sealed metal case (Type S-2) also available.

STANDCO
Vibrating Reed Frequency Meters

3-1/2" Flush Mounting Round Bakelite Case Type P-2
Screw Terminals 1/4"-28
100-150 Volts

Dual Range
50 and 60 Hz
100-150 Volts

400Hz
100-130volts

3 1/2" Hermetically sealed meters available
Voltages: any of the above meters can be supplied for
operation on 200-250V. 440V or other voltages at extra cost.
Other Frequency Ranges: can be supplied. prices upon request.

STANDCO
Vibrating Reed Frequency Meters

2-1/2" Flush Mounting Hermetically Sealed
Metal Case Type S-2
Solder terminals / 100-150 Volts



3-1/2" Flush Mounting Hermetically Sealed
Metal Case Type S-2 Solder Terminals

3-1/2" Sealed Meters Available in All Ranges
When ordering Meters specify suffix s-2 after cat. no., i.e. 367-S-2.
Voltages: Any of the above meters can be supplied for operation on 200-250v.
440V or other voltages at extra cost.
Other frequency Ranges: can be supplied. prices upon request.