 |
dlw@dlwco.com See all of our products by downloading our Lines Sheet. |
|
|
|
|
|
|
FMC Bin/Hopper/Chute Vibrators |
|
|
|
|
|
Syntron® Electromagnetic Bin Vibrators
Syntron® Electromagnetic Bin Vibrators from FMC Technologies offer an economical means of maintaining the flow of bulk materials from bins, hoppers and chutes. They come with an easily adjustable control, which provides flexibility and assures optimum flow for the type of material being handled. Furthermore, Syntron Electromagnetic Bin Vibrators can be operated continuously or intermittently depending upon the specific requirements. To assure the highest standard of quality, Syntron Electromagnetic Bin Vibrators are factory tested and adjusted for optimum performance. Most models come standard with totally enclosed, dust-tight and water-proof construction. Since these vibrators have no rotating or sliding parts, they are virtually maintenance-free. Syntron® Electromagnetic Bin Vibrators also come with the technical expertise of the FMC Technologies application staff, who have been providing productive solutions for a wide variety of material handling problems for more than 60 years. More about Electromagnetic Bin Vibrators, including pricing
|
|
|
|
|
|
Syntron® Electric Rotary Bin Vibrators
Syntron® Electric Rotary Bin Vibrators can be used to pack material in drums and bags as well as to consolidate material in pipe and precast industries, in vibrating screen applications and many other industrial environments. High stroke/low frequency models are especially suitable for hard-to-handle materials such as sawdust, cinder or clay content materials. Syntron® Electric Rotary Bin Vibrators also come with the technical expertise of FMC Technologies's application staff, who have been providing productive solutions for a wide variety of material handling problems for more than 60 years.
*At 3 feet (1 meter) on A scale Selecting the proper Syntron Electric Rotary Bin Vibrator
|
|
|
|
|
|
PV
and PVS Piston Vibrator Series |
|
|
Syntron® Piston Vibrators are available in two models: High impact (PV) and Reduced Noise (PVS). PVS vibrators (impact against a cushion of air) can be used where noise is objectionable. Unlike turbine vibrators, piston vibrators require lubrication with oil, SAE-10 or lighter. Lack of oil in the air rapidly wears down the piston and cylinder wall. NOTE: For bin capacity calculations, refer to page 4. Syntron® piston vibrators also come with the technical expertise of FMC's application staff who have been providing productive solutions for a wide variety of material handling problems for more than 60 years.
|
|
|
|
|
|
Syntron® Pneumatic Turbine Vibrators |
|
|
Unlike other vibrators, FMC's turbine vibrators use compressed air to turn a turbine wheel, allowing air to be channeled through the unit and then through a muffler. This makes turbine vibrators convenient in locations where electricity is not readily available. Speed is adjusted by simply varying the air supply. Additionally, the vibrator's sealed bearings are pre-lubricated for life, making them ideal for food and other applications where oily exhaust air is unacceptable. And, their compact, totally enclosed construction eliminates concern over environmental factors such as dust, dirt or moisture. Syntron turbine vibrators also come with the technical expertise of FMC's application staff, who have been providing productive solutions for a wide variety of material handling problems for more than 60 years. |
|
Syntron®
Electric Rotary Bin Vibrators from FMC provide a safe, reliable,
cost-effective way to maintain the flow of materials. Motor-driven to
provide virtually noiseless operation (most models 76 db or less*), these
vibrators help facilitate material flow from the smallest bin, hopper or
chute to the largest silo. Additionally, they are totally enclosed to
eliminate concerns over environmental factors such as dust, dirt and rain.
Syntron®
Piston Vibrators from FMC assure the flow of materials through bins,
chutes and weigh batchers. Their cast iron, flat base construction
provides an efficient means of transmitting shock energy developed by
the reciprocating piston to the mounting surface.
Cast
iron, flat base construction
Syntron®
Pneumatic Turbine Vibrators from FMC Technologies offer a convenient,
reliable alternative to other vibrators. Designed to keep noise
pollution at a minimum, Syntron Turbine Vibrators aid in controlling
the flow of material in almost any application, from screening, sizing
and separating both fine and coarse materials, to aiding the flow of
materials from supply hoppers and chutes, to driving parts feeders.